SHACKLES
CROSBY® BOLT TYPE SHACKLES
– Capacities 1/3 thru 150 metric tons, grade 6.
– Working load limit and grade “6” permanently shown on every shackle.
– Forged – quenched and tempered, with alloy bolts.
– Hot Dip galvanized or self coloured. (85, 120, and 150 metric ton shackles
– are all hot dip galvanized bows and the bolts are Dimetcoted® and painted red)
– Sizes 3/8 and below are mechanically galvanized.
– Fatigue rated (1/3t – 55t).
– Shackles 25t and larger are RFID EQUIPPED.
– Approved for use at -40° C (-40° F) to 204° C (400° F).
– Meets or exceeds all requirements of ASME B30.26.
– Shackles 85 metric tons and larger are individually proof tested to 2.0 times the
– working load limit.
– Type approval certification in accordance with ABS 2016 steel vessel rules
– ABS Guide for certification of lifting appliances available. Certificates available
when requested at time of order and may include additional charges.
– 3.1 certification as standard available for charpy and statistical proof test from 3.25t
up to 25 tons to DNV2.7-1 and EN13889.
– Crosby 3.25t through 25t G2130OC anchor shackles are type approved to DNV
certification Notes 2.7-1- offshore containers. These Crosby shackles are statistical
proof and impact tested to 42 Joules (31 ft*lbf) min. avg. at -20° C (-4° F). The tests
are conducted by Crosby and 3.1 test certification is available upon request.
– All other 2130 shackles can meet charpy requirements of 42 Joules (31 ft*lbf) avg at
-20° C (-4° F) when requested at time of order.
– Look for the Red Pin® . . . the mark of genuine Crosby quality